Sangean U4 DBT (V1) - Manual (Page 23)


GB
Manual tuning - FM
. Straighten the antenna.
. Press the Power button to switch on your radio.
3. Press and release the Source button until the FM band is selected.
4. Rotate the Tuning control to tune to a station. The frequency will
change in steps of 50kHz. If the radio is tuned to a station of sufficient
signal strength with RDS information present, then the display
may change to show the station name.
5. When the waveband end is reached the radio will recommence
tuning from the opposite waveband end.
6. Set the Volume to the desired setting.