Sangean U4 DBT (V1) - Manual (Page 42)

4
Set up my EQ profile
If you find the preset equalizer functions not to your liking, you may
set up a custom treble and bass as following:
. Press the Volume control to enter EQ menu.
. Rotate the Tuning control until ‘My EQ’ is shown on the display.
Press the Tuning control to enter the adjustment mode.
3. Rotate the Tuning control until ‘Treble’ is shown on the display.
Press the Tuning control to enter the treble adjustment mode.
4. Rotate the Tuning control to adjust the treble level (between-5
and+5). The sound will change as you adjust the level. Press
the Tuning control to confirm the setting. The display will then revert
to My EQ menu.
5. Rotate the Tuning control until ‘Bass’ is shown on the display.
Press the Tuning control to enter the adjustment setting. Rotate
the Tuning control until the desired level (between -5 and +5) is
displayed. The sound will change as you adjust the level. Press
the Tuning control to confirm the setting.
6. Rotate the Tuning control until ‘Loudness’ is shown on the display.
Press the Tuning control to enter the adjustment setting. Rotate
the Tuning control to select the desired setting. The options are
On or Off.. the default is Off. Then press the Tuning control to
confirm the setting.
Note:
To quickly cancel the effect of My EQ profile, rotate the Tuning
control until ‘Normal’ is shown on the display and press the Tuning
control. The treble and bass settings will be memorized for the next
time that you wish to use the My EQ.