Sangean U4 DBT (V1) - Manual (Page 33)

3
GB
Note:
Active alarms are indicated in the display by the alarm symbol
(e.g. ). If the radio cannot connect to the radio station, buzzer
alarm will be used instead. The alarm will sound for the selected
duration unless cancelled.
Cancelling alarms
Rotate the Tuning control to select the correct day and
then press the Tuning control to confirm the setting.
Rotate the Tuning control to select the correct month and then
press the Tuning control to confirm the setting.
Rotate the Tuning control to select the correct year and then
press the Tuning control to confirm the setting.
Rotate the Tuning control to choose the desired volume and
press the Tuning control to confirm the setting. Your radio will
show 'Alarm Saved' and will exit the alarm setting procedure.
.
.
3.
4.
While am alarm is sounding, it can be cancelled by pressing
the Power button.
To cancel the alarm before going off, enter the alarm setting
wizard and set the alarm On/Off option to ‘Off’ (Please refer to
previously described ‘setting an alarm’ section). Alternatively,
press the required alarm button and rotate the Tuning control to
select ‘off.’
.
.