Sangean U4 DBT (V1) - Manual (Page 30)

9
Pairing and playing your device via NFC
U4 DBT is equipped with wireless NFC (Near
Field Communication) feature, allowing
playing NFC-enabled devices to pair and
play the music. For non-NFC devices, please
refer to the above sections for standard
Bluetooth pairing.
. Turn on your NFC feature on your device. (
Important: Please
make sure the screen of your playing device is on and unlocked
to allow NFC to work.)
. Touch the NFC area of your playing device against the NFC area
marked on top panel of U4 DBT. The unit will turn on and enter
automatic pairing mode. If you pair with U4 DBT for the first time,
your NFC-enabled device will be asked the permission to link
with the radio. Once paired with a device, the Bluetooth icon will
remain illuminated.
3. Use the controls on your device or on your radio to play/pause
and navigate tracks.
Note:
. If you would like to link a different Bluetooth device for the first
time via NFC, disconnect the currently- linked Bluetooth device first.
. The location of the NFC detection area is not the same on all devices.
When connecting with other Bluetooth device via NFC, refer to
the User guide of your Bluetooth device for more information.
3. Some of metallic case or cover for mobile phones may reduce
the sensitivity of NFC. Make sure you remove it, before activating
the NFC.
Disconnecting your NFC-enabled device
To disconnect your device, simply touch it again on the top of the
unit. The LED light for Bluetooth icon will then start to flash indicating
your radio is discoverable again for pairing.
(
Important: Please make sure the screen of your playing device is
on and unlocked to allow NFC to work.)