BendixKing KLN 900 - Pilots Guide - Manual (Page 129)

5-22
To create a user waypoint called HOME at KIXD a sup-
plemental waypoint called HOME already exists:
1. Press the S button. (figure 5-81)
2. Use the right inner knob to enter “H”.
3. Turn the right outer knob one step clockwise to position
the cursor over the second character and then use the
right inner knob to select the “O”.
4. Continue this process to enter the “M” and “E”.
5. Press E Figure 5-84 will appear.
5. Press E and the new user waypoint HOME has been
defined at KIXD.
6. The SUP Figure 5-83 will appear.
When the SUP page appears on the right hand side,
entering a reference identifier in the reference field will
cause the radial and distance from that reference way-
point to be computed and displayed. The reference,
radial, and distance data is lost when this page is left.
When a new waypoint is first displayed, the reference
identifier on line 2 will be filled in with the nearest VOR to
the waypoint.
If the S button is pressed and so the S page is
shown while the SAVE page is displayed, operation
returns to the previous active page.
Rev 2
|SAVE WPT AT
|N 38^49.91'
|W 94^53.39'
|OVERWRITE?
|IDENT: HOME
|
SAVE
Figure 5-84