BendixKing KLN 900 - Pilots Guide User Manual
Page 203
Rev 2
C-2
arc. Change the track (heading) of the aircraft so that
the actual track does intercept the DME arc and try
again.
NO NDB WPTS - (No NDB Waypoints) Appears when
the NDB type pages have been selected if the KLN 900
doesn’t contain a data base cartridge and there are no
user-defined NDB waypoints.
NO SUCH WPT - (No Such Waypoint) Appears when
there is no waypoint in the data base corresponding to
the entered identifier on the Reference Waypoint page.
NO SUP WPTS - (No Supplemental Waypoints)
Appears when the SUP type pages have been selected
if the KLN 900 doesn’t contain a data base cartridge and
there are no user-defined supplemental waypoints.
NO VOR WPTS - (No VOR Waypoints) Appears when
the VOR type pages have been selected if the KLN 900
doesn’t contain a data base cartridge and there are no
user-defined VOR waypoints.
OUTDATED DB - (Outdated Database) Appears
whenever the pilot attempts to select an approach from
the database when the database has expired.
RMKS FULL - (Remarks Full) Appears when an
attempt is made to create a user-entered airport remark
on the APT 5 page if 100 user-entered airport remarks
already exist. In order to create additional airport
remarks, some existing remarks must be deleted on the
OTH 4 page as described in section 3.11.6.
RWY MISSING - (Runway Missing) Appears when the
Airport 3 (APT 3) page runway diagram shows some,
but not all, of the runways at the selected airport. This
occurs if the data base contains runway threshold posi-
tion data for only some of the runways at the selected
airport.
USED IN FPL - (Used In Flight Plan) Appears when
you try to delete a user-defined waypoint on the OTH 3
page if the waypoint is used in a flight plan. Either this
waypoint must be deleted from the flight plan or the
entire flight plan must be deleted before this waypoint
can be deleted from the user-defined waypoint list.
USR DB FULL - (User Data Base Full) Appears when
you attempt to create a user-defined waypoint if the user
data base already contains 1000 waypoints (250 way-
points for ORS 01 units). In order to create additional
user-defined waypoints, it will first be necessary to delete
existing user-defined waypoints on the OTH 3 page.