BendixKing KLX 135A - Pilots Guide User Manual

Page 14

Advertising
background image

TO:

SEE PAGE:

Delete a waypoint remark from the OTH 4 page . . . . . . . . . . . . . 3-60

Display the nearest airport continuously. . . . . . . . . . . . . . . . . . . . 3-28

Enter a user-defined waypoint remark on the SUP 3 page . . . . . 3-54

Enter a waypoint identifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

Enter an airport remark on the APT 5 page . . . . . . . . . . . . . . . . . 3-50

Enter the local magnetic variation manually on the SET 2 page . 4-30

Fly Direct To a waypoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33

Fly direct to a waypoint in the active flight plan (FPL 0). . . . . . . . 4-12

Initialize the position from the SET 1 page. . . . . . . . . . . . . . . . . . 3-18

Recenter the D-Bar by going direct to the active waypoint . . . . . 3-34

Select a VOR or NDB by navaid name . . . . . . . . . . . . . . . . . . . . 3-23

Select a waypoint by identifier from a waypoint page . . . . . . . . . 3-20

Select a waypoint by scanning with the cursor off . . . . . . . . . . . . 3-22

Select a waypoint by scanning with the cursor on . . . . . . . . . . . . 3-22

Select an airport by scanning the airport name . . . . . . . . . . . . . . 3-24

Set the date on the SET 2 page . . . . . . . . . . . . . . . . . . . . . . . . . . 3-55

Set the time on the SET 2 page . . . . . . . . . . . . . . . . . . . . . . . . . . 3-56

Specify the nearest airport criteria . . . . . . . . . . . . . . . . . . . . . . . . 3-27

Store the active flight plan as a numbered flight plan. . . . . . . . . . . 4-7

Tune a 25 kHz COMM frequency. . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Tune a COMM frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Tune a COMM frequency from the data base . . . . . . . . . . . . . . . . 5-3

Tune a COMM frequency using active frequency entry mode. . . . 5-2

Tune a COMM frequency using standby frequency entry mode . . 5-1

Turn on and initialize the KLX 135A . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Update the KLX 135A data base . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

View a message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16

View the waypoints in the flight plan that are not the

active waypoint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

KLX 135A Pilot’s Guide

Introduction

v

Effective Date 5/95

006-08789-0000 Rev 0

Advertising