BendixKing KLX 135A - Pilots Guide User Manual

Page 85

Advertising
background image

7.

Press

F

to start the KLX 135A

using the newly entered date
(figure 3-162).

To set the time on the SET 2 page:

1.

Select the SET 2 page if it is not already selected.

2.

Turn on the cursor and move it to
the time zone field (figure 3-163).

3.

Change the time zone with the
right inner knob, if desired
(figure 3-164). A listing of the
time zones and their abbrevia-
tions is contained in section 3.2,
“Turn-on and Self Test”.

4.

Move the cursor to the time field.
The hours and minutes will
appear in inverse video.

5.

Select the correct hour
(figure 3-165). Remember, the
KLX 135A uses 24 hour time. If it
is 1:00 P.M. or later, add 12 hours
(for example, 2:30 P.M. becomes
14:30).

6.

Move the flashing part of the
cursor to the tens of minutes,
select the proper number
(figure 3-166), then move on to
the last digit and set it.

7.

Press

F

to start the clock

running (figure 3-167). Note that
the seconds will reset to zero
when you do this.

Basic GPS Operation

3-56

Effective Date 5/95 006-08789-0000 Rev 0

Basic GPS Operation

Chapter 3

APT VOR NDB SUP ACT NAV FPL CAL SET OTH

118.00 DATE/TIME
136.97 08 DEC 94
>Leg 1536:30

MST

CRSR

Mountain Std

Figure 3-163

APT VOR NDB SUP ACT NAV FPL CAL SET OTH

118.00 DATE/TIME
136.97 08 DEC 94
>Leg 1536:31

MDT

CRSR

Mountain Day

Figure 3-164

APT VOR NDB SUP ACT NAV FPL CAL SET OTH

118.00 DATE/TIME
136.97 08 DEC 94
>Leg

1536:26

MST

CRSR

Mountain Std

Figure 3-162

APT VOR NDB SUP ACT NAV FPL CAL SET OTH

118.00 DATE/TIME
136.97 08 DEC 94
#>Leg

14__

:42 MDT

CRSR

Mountain Day

Figure 3-165

APT VOR NDB SUP ACT NAV FPL CAL SET OTH

118.00 DATE/TIME
136.97 08 DEC 94
#>Leg

143_

:42 MDT

CRSR

Mountain Day

Figure 3-166

APT VOR NDB SUP ACT NAV FPL CAL SET OTH

118.00 DATE/TIME
136.97 08 DEC 94
>Leg 1430:00

MDT

CRSR

Mountain Day

Figure 3-167

Advertising