CANOGA PERKINS L357 Gigabit Ethernet Service Unit - Manual (Page 10)

EdgeAccess Universal Chassis System
L357 Gigabit Ethernet Service Unit 1-2
1.2 L357 Hosts
The L357 can be used in a variety of chassis. To install the L357 in a UCS 1000 or UCS 1001
chassis, you must use a Model 1230 Bus Access Module (BAM). However, you can install the L357
directly in a UCS 1002 or Model 1020 or 1030 enclosures.
• The UCS 1000 Chassis can hold up to 15 Model 1230 BAMs with up to two L357s per BAM.
This allows a total of 30 L357s per UCS 1000.
• The UCS 1001 Chassis can hold up to two Model 1230 BAMs with up to two L357s per BAM.
This allows a total of four L357s per UCS 1001.
• The UCS 1002 Chassis directly hosts up to 14 L357s, or 13 L357s with the optional Domain
Management Module (DMM) installed.
• A 1020 or 1030 standalone enclosure holds one L357.
The L357 is hot swappable. It can be inserted or removed at any time without disrupting the data
transfer of other modules in the chassis.