CANOGA PERKINS L357 Gigabit Ethernet Service Unit - Manual (Page 32)

EdgeAccess Universal Chassis System
L357 Gigabit Ethernet Service Unit 4-12
IP/SNMP AGENT CONFIGURATION
Local Remote
MAC Address 00 40 2A 00 87 E3 00 40 2A 00 53 E7
Management Port UP UP
1) Ethernet IP Address 172.016.148.030 172.16.143.10
Subnet Mask 255.255.000.000 255.255.0.0
Default Gateway 000.000.000.000 172.16.1.1
2) SLIP/PPP IP Address 000.000.000.000 192.0.0.83
3) Serial Port Config VT100 VT100
4) BOOTP Disabled Disabled
5) Telnet Security Disabled Disabled
6) Host Table
7) Trap Table
8) Inband Management Port Both Ports
9) Management VLAN Disabled
10) Management VLAN Number 1
Figure 22. IP/SNMP Agent Configuration Screen
Table 7. SNMP Configuration Parameters Description
Item Description
1) Ethernet IP Address
Subnet Mask
Default Gateway Enter the IP address for access through the Ethernet network, the
mask that sets the network ID part of the IP address, and the address
of the network node that connects to another network
2) SLIP/PPP IP Address Enter the IP address for access through SLIP or PPP
3) Serial Port Config Set the type of serial port connection: VT100, SLIP, or PPP
4) BOOTP Enable this if the module needs to obtain its IP address from a
BOOTP server; when the unit has an IP address, disable BOOTP
5) Host Table Access the Host Table screen (for standalone enclosure, only)
6) Trap Table Access the Trap Table screen (for standalone enclosure, only)
8) Inband Management
Port Set the port that will receive management packets; can be Ext. only,
User only, Both ports, or No Management
9) Management VLAN Enable or disable the Management VLAN
10) Management VLAN
Number Set the number for the VLAN; range is 0-4095