CANOGA PERKINS L357 Gigabit Ethernet Service Unit - Manual (Page 44)

EdgeAccess Universal Chassis System
L357 Gigabit Ethernet Service Unit 4-24
4.11.1 PING Generation
Use the PING Generation screen to test the connection to a specific IP address. See Figure 37.
PING Generation
IP Address to PING: 0.0.0.0
PING count (1 to 255, 0 = forever): 0
Figure 37. PING Generation Screen
To use Ping to check a connection, follow these steps:
1. From the Main Menu, type 7 , "Utilities," and press <Enter>.
1. From the Utilities menu, type 7 , "PING Generation," and press <Enter>.
2. At the PING menu prompt, set the Ping parameters, and press <Enter>.
"PING response received..." indicates a good connection;
"TIMEOUT: Unable to reach [IP address]..." indicates a faulty connection.
3. To stop the Ping, press <Esc>.
4.11.2 Static ARP Table
Use the Static ARP Table to set specific IP and MAC addresses for up to 10 ports. See Figure 38.
STATIC ARP TABLE
IP Address MAC ADDRESS Port
1. 172.16.2.7 00-90-37-56-6C-34
2. 172.16.3.23 00-7C-25-33-57-9C
Figure 38. Static ARP Table Screen
To use view, set, or remove an address, follow these steps:
1. From the Main Menu, type 7 , "Utilities," and press <Enter>.
2. From the Utilities menu, type 8 , "Static ARP Table," and press <Enter>.
3. At the prompt, type 1 to add an entry or 2 to remove an entry, and follow the prompts.
4. To return to the Utilities menu, press <Esc>.