CANOGA PERKINS L357 Gigabit Ethernet Service Unit - Manual (Page 41)

EdgeAccess Universal Chassis System
L357 Gigabit Ethernet Service Unit 4-21
SYSTEM ALARMS
Local Remote
Configuration Errors No No
User Port Up Up
Extension Port Up Up
Remote Fault User/Ext N/A N/A
Ext Port Remote Fault No No
Link Loss Echo User/Ext No No
Link Loss Fwd Ext->User No No
Link Loss Fwd User->Ext No No
Side Band Mgmt Channel OK OK
Chassis Management OK OK
Alarm Relay Inputs N/A N/A
Power Supply Primary OK OK
Power Supply Secondary OK OK
Fan OK OK
Chassis Temperature N/A OK
Figure 33. System Alarms Screen
4.9 Layer 2 Statistics
Use the Layer 2 Statistics screen to view data transfer protocol statistics on the L357. See Figure 33.
To view layer 2 statistics, follow these steps:
1. From the Main Menu, type 5 , "System Alarms," and press <Enter>. The Layer 2 Statistics screen
appears.
2. To reset the counters, press <Ctrl-R>.
3. When you finish checking the statistics, press <Esc> to return to the Main Menu.
LAYER 2 STATISTICS
Local Local Remote Remote
User Port Ext Port Ext Port User Port
Link State UP UP UP UP
Speed/Duplex 1000M/FULL 1000M/FULL 1000M/FULL 1000M/FULL
Frames Sent 28207788 28319769 28200427 28200710
Frames Rcvd 28319769 28207788 28200711 28200426
Bytes Sent 837493720 926021313 831705864 831880780
Bytes Rcvd 926020552 837494685 831881457 831705499
Undersize (< 64) 0 0 0 0
Frames > 1518 0 0 0 0
Oversize (>10000) 0 0 0 0
CRC Errors 0 0 0 0
Fragments 0 0 0 0
Collisions 0 0 0 0
Late Collisions 0 0 0 0
Dropped 0 0 0 0
Frames Sent Rate 7802/s 7796/s 7815/s 7802/s
Frames Rcvd Rate 7796/s 7802/s 7802/s 7815/s
Figure 34. Layer 2 Statistics Screen