CANOGA PERKINS L357 Gigabit Ethernet Service Unit - Manual (Page 23)

EdgeAccess Universal Chassis System
L357 Gigabit Ethernet Service Unit 4-3
4.3.2 User Interface Organization
The user interface consists of selectable, nested screens, available in this order:
Main Menu
1. System Configuration
1. Hardware Configuration
2. Functional Configuration
3. Trap Configuration
4. Alarm Output Configuration
5. IP/SNMP Agent Configuration
6. Host Access Table (for standalone enclosure, only)
7. Trap/Notification Destination Table (for standalone enclosure, only)
6. Security Configuration
7. User Accounts
1. or 3. Edit User Account
8. System Information
2. Diagnostics
1. Loopback Setup
2. Remote Latency/Jitter Test
3. Remote Connectivity Loss Detection
3. Link Status
4. System Alarms
5. Layer 2 Statistics
6. System Log
7. Utilities
7. PING Generation (for standalone enclosure, only)
8. Static ARP Table (for standalone enclosure, only)
9. Dynamic ARP Table (for standalone enclosure, only)
8. Software Upgrade
9. Change Password (for standalone enclosure, only)
10. Connected Sessions (for standalone enclosure, only)
Some screen descriptions include detail about SPFs for reference; the information appears on-screen
only when the L357 includes one or two SPFs.
This chapter describes each of these screen in detail.
4.3.3 Login Menu
The first screen is the Login Menu. If this is your initial setup and no password has been set, type
admin at the Login Username prompt and press <Enter>, then type admin at the prompt for the