CANOGA PERKINS N525 Ethernet Termination Service Unit User Manual
Page 35
N525 Ethernet Termination Service Unit
3-17
6. To retrieve the configuration file, type [get N525.CFG] and press <enter>
7. To end the ftp session, type [bye] on the prompt and close the window.
You can use any text editor such as Notepad
1
or WordPad
2
to edit the configuration file. Please
see Appendix C for an example format and the different fields of a configuration file.
Once you have made your changes to the configuration file and are now ready to download the
changes to the N525, follow these steps:
1. Open a command prompt on your PC and type [ftp xxx.xxx.xxx.xxx] where the x’s
are is the IP address corresponding to the N525’s management IP address and press
<enter>.
2. Type the Username and Password and press <enter>
3. Set ftp to “binary” mode by typing [binary] at the prompt and press <enter>
1
2
Notepad and WordPad are trademarks of Microsoft Corporation