CANOGA PERKINS N525 Ethernet Termination Service Unit - Manual (Page 54)

3-36 N525 Ethernet Termination Service Unit
3. The Edit Host Access Menu sets the following parameters.
a. Telnet Access
Telnet and SSH, Telnet Only, SSH Only, or None
b. FTP Access
Select FTP and SFTP, FTP Only, SFTP Only, or None
c. SNMP Access
Select Write (also allows Read access), Read, or None
d. SNMP Protocol
Select V1/V2c/V3, V1/V2c, or V3
e. V1/V2c Read Community
Enter name of community, up to 11 characters
f. V1/V2c Write Community
Enter name of community, up to 11 characters
g. V1/V2c Access Level
Select Supervisor, Operator, or Observer
4. To remove a host, type [ d ], then follow the prompts.
5. To return to the Main Menu, press <Esc>.
Configuring a Radius Client
Before setting the N525 as a Radius Passthru Client, you must set related attributes on the
Radius Server to predefined values in order to properly authenticate and configure the user.
The N525 uses four vendor-specific attributes, type 25 in the Radius RFC. Canoga Perkins
vendor’ identifier is 919.
1. Attribute 1 - Access From
Values: 1, UI (default); 2, SNMP; and 3, UI and SNMP
2. Attribute 2 - Access Level
Values: 2, Observer (default); 3, Operator; and 4, Supervisor
3. Attribute 3 - Description
A string, optional and not predefined. The default is "Radius Account."
4. Attribute 4 - Logout User
Values: 0, No, and 1, Yes (default).