CANOGA PERKINS 9145E Ethernet Network Interface Device Hardware - Manual (Page 23)

Functional Description 9145E Ethernet Network Interface Device User’s Manual
LED Indicators
11
2.6.6 AC/DC Power Base Unit
The AC/DC powered 9145E base unit (see Figure 2-7) has two power interfaces on the rear-
panel, one that supports DC power input and one that supports a AC power input. An appropriate
AC power cord and a DC terminal block are supplied with the unit.
Figure 2-8. AC/DC Power
2.7 LED Indicators
The following paragraphs describe the functions of the LED indicators on the 9145E base unit.
Figure 2-9. LED Indicators
POWER LED
STATUS LED
LNK/ACT LED
SPD LED
LNK/ACT LED
SPD LED LNK/ACT LED
LNK/ACT LED SPD LED
SPD LED
USER PORT
USER PORT
NETWORK PORT
NETWORK PORT
MULTIPURPOSE PORT
MULTIPURPOSE PORT