CANOGA PERKINS 9145E Ethernet Network Interface Device Hardware User Manual
Page 30
9145E Ethernet Network Interface Device User’s Manual
Installation
Mounting Options
18
Mounting One 9145E in a 19" or 23" Rack - To rack mount one 9145E, perform the follow-
ing steps:
1. Install the 19" Single Unit or 23" Single Unit Rack Mount Bracket Kit. The Rack Mount Kit
includes two mounting brackets, and the screws required to attach the brackets to the
9145E. The brackets attach to the two threaded holes on each side of the 9145E, toward
the front (see Figure 3-3) using the flat head screws provided. Torque the flat head
screws to 14.5 – 15.5 in-lb.
Figure 3-3. Install Rack Mount Kit
2. Place unit with brackets attached in place on the mounting rack.
3. Install two screws through each bracket into the threaded holes on the mounting rack
(see Figure 3-4). Torque the screws to the rack manufacturer’s specifications.
Figure 3-4. Mount 9145E on Rack