CANOGA PERKINS 9145E Ethernet Network Interface Device Hardware - Manual (Page 28)

9145E Ethernet Network Interface Device User’s Manual Installation
Mounting Options
16
Figure 3-1. Unpacking the 9145E
3.3 Mounting Options
The 9145E can be rack mounted, wall mounted, or placed on any horizontal flat surface such as
a shelf or table.
3.3.1 Rack Mounting
One 9145E can be mounted in either a 19" rack or a 23" rack, and two 9145Es can be mounted
side by side in either a 19" rack or a 23" rack. Rack mounting kits (reference Table 3-1) are avail-
able for each of the four rack mounting possibilities. Each rack mount kit contains the brackets
necessary for installing the 9145E (see Figure 3-2), as well as the mounting hardware required to
attach the brackets to the unit(s). Rack mount screws are provided by the rack manufacturer.
GR1
USER M ANUALS