CANOGA PERKINS CanogaView EMS - Manual (Page 14)

CanogaView EMS Installation Guide INSTALLATION
(10)
STEP 7 GLASSFISH INSTALLATION OPTIONS
The Glassfish Installation Options window appears displaying Domain information and network
ports. You may change any of the information in this window exercising a few cautions:
• Administrator user name and Administrator password fields hold the system defaults.
The user name and password allow you to log into the Server Admin Console which is a
feature located in the CanogaView EMS menu under Utilities. Be sure to copy down the
default username and password. Should you decide to change them, be sure to copy
down the new ones.
• The default ports can be used provided they are not already in use. If in use, you can
assign new ports.
If you try to use a port that is already in use, you will see a notice later in the
installation indicating that an installation failure has occurred.
If you change the top port number (8080 default) listed in the Glassfish Installation
Options window, be sure to write it down. The final step in this procedure will describe
why you need this information.
When finished click Next.
The Administrator user name and Administrator password are not the username and password for
logging into the CanogaView EMS Core features. The default username and password for logging
into the CanogaView EMS Core features is admin for both, i.e., admin is the default username and
also the default password. You can change these after you log into CanogaView EMS.
STEP 8 USER DATA
The User Data window appears and shows the SNMP Notification Port number. The default port
number is 162. If this port is already in use by another application, you can change the number to
a different port number (e.g. 164).
Make necessary changes, then click Next to continue.
STEP 9 SUMMARY CONFIGURATION DATA
When the Summary Configuration Data window appears and displays JDK information. Review the
data, then click Next.
STEP 10 INSTALLATION
The Installation window copies files from the installation CD to the disk. When the installation
procedure is finished, click Next.
STEP 11 PERFORM EXTERNAL PROCESSES
The Perform External Processes window performs the following:
• Registers CanogaView Application Server Service
• Starts the CanogaView Application Server Service
• Configures the JMS Service
• Creates the CanogaView Authentication Realm
• Creates CanogaView Login Audit Module
• Customizes the CanogaView Application
• Deploys CanogaView Application
• Configures SNMP Resource Adapter
• Restarts the CanogaView Application Server Service
When the Perform External Processes procedure is finished, click Next.