DVR systems DVR-HDE-960H-960H2 Series - Manual (Page 109)

Figure 8.6 Copy Settings of Motion Detection
8.2 Setting Sensor Alarms
Note: This section is available for 960H2U models only.
Purpose:
You can set handling method of an external sensor alarm.
Steps:
1. Enter Alarm Settings interface and select an alarm input.
Menu> Configuration> Alarm
Figure 8.7 Alarm Status Interface
2. Select Alarm Input tab to enter Alarm Input Settings interface and set the handling method of the
selected alarm input.
Check checkbox to enable the alarm input and click to set up its alarm response actions.
108