DVR systems DVR-HDE-960H-960H2 Series - Manual (Page 117)

8.7 Triggering or Clearing Alarm Output Manually
Note: This section is available for 960H2U models only.
Purpose:
Sensor alarm can be triggered or cleared manually. If Manually Clear is selected in the dropdown list of
dwell time of an alarm output, the alarm can be cleared only by clicking Clear button in the following
interface.
Steps:
Select the alarm output you want to trigger or clear and make related operations.
Menu> Manual> Alarm
Click Trigger / Clear button if you want to trigger or clear an alarm output.
Click Trigger All button if you want to trigger all alarm outputs. Click Clear All
button if you want to clear all alarm output.
Figure 8.20 Clear or Trigger Alarm Output Manually
116