DVR systems DVR-HDE-960H-960H2 Series - Manual (Page 16)

No.
1
2
Name
POWER
DEV
Table 1.3 Description of the IR Remote Control Buttons
Description
Power on/off the device.
Enables/Disables Remote Control.
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Alphanumeric Buttons
EDIT Button
A Button
REC Button
PLAY Button
INFO Button
VOIP/MON Button
MENU Button
PREV Button
DIRECTION/ENTER
Buttons
PTZ Button
ESC Button
RESERVED
F1 Button
PTZ Control Buttons
F2 Button
Switching to the corresponding channel in Live view or PTZ Control
mode.
Inputting numbers and characters in Edit mode.
Switching between different channels in All-day Playback mode.
Editing text fields. When editing text fields, it will also function as a
Backspace button to delete the character in front of the cursor.
On checkbox fields, pressing the EDIT button will tick the checkbox.
In Playback mode, it can be used to generate video clips for backup.
Switching between input methods (upper and lowercase alphabet,
symbols and numeric input).
Entering the Manual Record settings menu.
In PTZ control settings, press the REC button and then you can call a
PTZ preset by pressing Numeric button.
Entering the All-day Playback menu.
Reserved.
Selecting all items on the list;
In live view or playback mode, it can be used to switch between main
and auxiliary video output.
Back to the Main menu (after successful login).
Switching between single screen and multi-screen mode.
Navigating between different fields and items in menus.
In Playback mode, the Up and Down button are used to speed up and
slow down the playing of recorded video.
The Left and Right button will select the recorded video of 30 reverse
and 30s forward.
In live view mode, these buttons can be used to cycle through channels.
Enter the PTZ Control mode.
Back to the previous menu
Pressing for arming/disarming the DVR in Live View mode.
Reserved.
Selecting all items on the list when used in a list field.
In PTZ Control mode, it will turn on/off PTZ light.
Adjusting the iris, focus and zoom of a PTZ camera.
Cycle through tab pages.
Troubleshooting Remote Control:
Note: Make sure you have installed batteries properly in the remote control. And you have to aim the remote
control at the IR receiver on the front panel.
If there is no response after you press any button on the remote, follow the procedure below to troubleshoot.
Steps:
1. Go to Menu > Configuration > General > More Settings by operating the mouse.
2. Check and remember the device No. The default No. is 255. This device No. is valid for all the IR