DVR systems DVR-HDE-960H-960H2 Series - Manual (Page 137)

10.1 Initializing HDDs
Purpose:
A newly installed hard disk drive (HDD) must be initialized before it can be used with your device.
Steps:
1. Enter the HDD Information interface.
Menu > HDD>General
Figure 10.1 HDD Information Interface
2. Select the HDD to be initialized.
3. Click the Init button.
Figure 10.2 Confirm Initialization
4. Select the OK button to start initialization.
5. After the HDD has been initialized, the status of the HDD will change from Uninitialized to Normal.
136