Transmitting documents with fewer procedure, Or more sheets at a time, Documents you can send – Panasonic KXF1100 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. Transmitting and Receiving Fax Calls
Transmitting documents with fewer procedure
1
2
Insert the documents FACE DOWN.
Dial a phone number.
• If you misdial, press [ STOP ] and dial again.
Press [START/SETl.
•The unit will start to dial and transmit the
documents.
Note:
If there is no answer or the line is busy, the unit
will automatically redial the number up to 5 times.
To cancel redialing, press [STOP].
To send
16
or more sheets at a time
Insert the first 15 sheets of the documents. Add the extra sheets (up to 15) before the last sheet is fed into the
unit.
Documents you can send
Minimum size
Maximum size
Effective scanning area Document weight
128 mm
(5")
216 mm (Sy/)
4 mm
Scanned
area
208 mm (83/i6")
Paper width
216 mm (
8
y
2
")
Single sheet;
45 to 90 g/m^ (12 to 24 lb.)
Multiple sheets;
60 to 75 g/m^ (16 to 20 lb.)
Note;
• Remove clips, staples or other similar fastening objects from a document.
•Check that ink, paste or correction fluid on the documents have completely dried.
•Do not feed the following types of documents into the unit. Make copies of these documents by using a
copier then use these copies for fax transmission.
—Paper with a chemically treated surface such as
carbon paper or carbonless duplicating paper
—Electrostatically charged paper
—Heavily curled, creased or torn paper
—Paper with a coated surface
—Paper with faint contrast between the printing
and the background
—Paper with printing on the reverse side that can
be seen through the front (e.g. newspaper)
19