Error messages on the display, Error message, Cause & remedy – Panasonic KXF1100 User Manual
Page 61: Troubleshooting and routine care
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
9. Troubleshooting and Routine Care
Error messages on the display
If the unit detects a problem, one of the following messages will appear on the display.
ERROR MESSAGE
BATTERY LOW
CHECK CASSETTE
CHECK COVER
CHECK DOCUMENT
CHECK FILM
CHECK MEMORY
FILM EMPTY
LOADING FILM
MEMORY FULL
NO ANS GREETING
NO RESPONSE
OUT OF PAPER
PAPER JAMMED
POLLING ERROR
REMOVE DOCUMENT
TRANSMIT ERROR
UNIT OVERHEATED
CAUSE & REMEDY
'Battery power is low. Replace the batteries with new ones (see page 5).
►The recording paper is jammed near the paper cassette. Clear the jammed
paper (see page 64).
•The top cover is open. Close it.
•The document is not fed into the unit properly. Reinsert the document and try
again. If misfeeding occurs frequently, clean the feeder rollers (see page 67). If
the problem remains, adjust the feeder pressure (see page 66).
►The film is not inserted in the cartridge correctly.
Reinsert it correctly by referring to step 8 on page 69.
'Memory (phone numbers, parameters, etc.) has been erased.
Re-program.
• Film is empty. Replace the film or film cartridge with a new one (see page 68).
•The blue leader of the film was not wound completely or the unit was out of film.
Wait for a while.
►There is no room left in memory to record a message. Erase some or all
messages (see page 24).
►The common greeting message has not been recorded.
Record the message, (see page 15).
►The receiving unit was busy or ran out of recording paper. Try again.
•The unit is out of recording paper. Install paper (see page 6).
•The recording paper is jammed near the head unit. Clear the jammed paper
(see page 64).
►The other fax machine does not provide the polling function. Check the other
party.
►The document is jammed. Remove the jammed document (see page 66).
►Attempted to transmit a document longer than 600 mm (23Va"). Press the STOP
button and remove the document (see page 66). Divide it into two or more
sheets and try again.
►Transmission error occurred. Try again.
►The unit is overheated. Leave it to cool down.
H
61