Panasonic KXF1100 - Manual (Page 45)

8. Advanced Operations
Re~recording a greeting message
You can change the content of the greeting
message from a remote location.
1
2
Call your unit.
For the common greeting message:
Press
yo u r remote ANS ID.
For the mailbox greeting message:
Press and (T|, 0 or (desired
mailbox no.). Then press the mailbox
password.
Press 0 to start recording.
•A long beep will sound.
Speak immediately after the long beep (up to
16 seconds).
•If you pause for over 2 seconds while
recording, the unit will beep and stop the
greeting message recording. Repeat from
step 2 within 10 seconds.
When finished, press Q-
•The new greeting message will be played.
Turning on/off pager aiert
You can remotely turn on/off the pager alert for
incoming message if it has been programmed with
a pager number in advance (see page 54).
1 Call your unit.
For the common pager alert;
Press the remote ANS ID.
For a mailbox pager alert;
Press and the mailbox number ([T], [T]
or [^), then press the mailbox password.
To turn on the pager alert, press (sjCD-
To turn off the pager alert, press
To skip the greeting message
Callers can record their messages without listening
to the greeting message.
After calling your unit, dial during the greeting
message playback.
•The unit will skip the rest of the greeting
message and start recording.
45