Panasonic KXF1100 - Manual (Page 42)

8. Advanced Operations
Programming the remote ANS ID
The remote ANS ID is used to access your answering device and listen to your messages in common
memory.
Choose any number from 111 to 999 except a number using digits 0 or 7.
Make sure that the first 2-digits of the remote ANS ID are different from the junk mail prohibitor ID.
1
2
3
4
5
6
Press [MENU],
SYSTEM SET UP
Press then (T)[^.
REMOTE ANS ID
Press [START/SET],
ID=111
Enter the desired number.
Press START/SET .
Press [MENU].
Listening to messages in common memory
1
2
Call your unit.
Press the remote ANS ID during common
greeting playback.
•A long beep and a short beep(s) will sound.
Short beep(s) indicate(s) the number of
new recorded messages.
Short beeps will sound up to 8 times even if
9 or more calls are recorded.
Press to listen to new recorded
messages.
OR
Press or wait for 4 seconds to listen to all
of the recorded messages.
Note:
If you hear 6 beep tones after playing back the
messages, memory is full. You must erase some
or all of the messages.
To listen to messages in a mailbox
after playback
1. Press and the desired mailbox number
□.[HorU].
2. Press the mailbox password.
3. Press the direct remote command 0 or
fsl to play back messages.
42