Reference) screen features, Type of screen, Screen features – Panasonic TC-LT1 Series User Manual
Page 19: White screen, Silver screen, Bead screen, Selecting screen
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting Screen
A screen is needed to view images from the projector. The brightness and viewing range may vary depending on the type of
screen used.
When selecting a screen, please consider the features of the screen carefutly, and select a screen that fits the location where the
screen is to be used.
(Reference) Screen Features
Type of Screen
Screen Features
Can be viewed from any direction within
the viewable area. However, clear images
cannot be seen unless the room is
darkened like a movie theatre.
White Screen
Silver Screen
Images are reflected off of the screen at 2-
4 times the brightness of a white screen.
Various screen manufacturers sell various
types of screens, that offer differing
brightness ranges. Some screens also
restrict the viewing angles.
*Well suited to ceiling or wall projection.
Bead Screen
Similar to a silver screen, except that
images are reflected back in the same
direction from which they were sent.
*WelI suited to projection when the
projector is to be placed on a table stand
or floor stand.
Type 80 and Type 100 bead screens are sold separately.
Type 80
Type 100
TY-SC80S {with speakers)
TY-SC80N
TY-SC100N
19