Setting, Convenient options for use, Changing screen display language – Panasonic TC-LT1 Series User Manual
Page 28: Using the noise timer feature, Using the off timer feature
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■Changing Screen Display Language.
Data for 7 languages is stored in the Projector. Use the following procedure to display the language of your choice.
SettinQ Procedure
To switch to Chinese ('PS)
(Example: When using AV1 and AV2)
Convenient Options for Use
Press the MENU Button,
Use the ▲ and ▼ buttons to select the "LANGUAGE” Menu.
Then use the
4
and ► buttons to execute.
Use the ▲ and ▼ buttons to select
Chinese “ipS”.
Press the MENU Button twice to complete.
PICTURE
COLOUR SYSTEM
SETTING
FEATURES
LANGUAGE
O
@
Using the Noise Timer Feature
The projector offers a Noise Timer feature, which automatically switches the projector into standby mode to save energy if the
projector is left for 5 minutes or more without any signal being input. At the time of shipment this feature is turned Off. Please
follow the following procedure to turn the Noise Timer On, if you wish to use this feature.
SottiriQ
ProCGdurG (Example : When Using AV1 and AV2)
ENGLISH
*PÄ
FRANÇAIS
ESPAÑOL
DEUTSCH
ITALIANO
O
Press the MENU Button
Use the ▲ and ▼ buttons to select the "FEATURES" Menu.
Then use the
<
and ► buttons to execute.
Use the ▲ and ▼ buttons to select “NOISE TIMER”.
Then use the
4
and ► buttons to switch the Noise Timer off or on.
(Set to On to operate the Noise Timer)
Press the MENU Button twice to complete.
PICTURE
COLOUR SYSTEM
SETTING
FEATURES
LANGUAGE
BLUE BACK OFF
P-DE
OFF
NOISE TIMER ON
• Settings of the NOISE TIMER would be stored in the memory even when it turns off the power.
• If the Noise Timer feature is operating, a flashing light will appear at the bottom right hand corner of the screen
when less than 3 minutes are left.
• When the OFF TIMER has already been set, it will have the priority.
i
Using the Off Timer Feature
Setting
• The time setting will change each time you press the button on the Remote Control.
Example: Set for 30 Minutes
'5® remaining time
falls to 3 minutes.
0
30
—
0 60
0
90
—
0
0
030
0 ;3l'
The Timed Off feature will be turned off when the setting is set to "0".
Display flashes on and off.
28
If you wish to know how much time is remaining, press the Off Timer button once, or confirm by pressing the
Recall button.