Table of compatible pc signals, System examples, Selecting the signal mode for rgb signal input – Panasonic TC-LT1 Series User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
System Examples
Selecting the Signal Mode for RGB Signal Input
The Projector is set to Auto, which will automatically select the Signal Mode that matches or is closest to the input signal, in the
data that is loaded into the Projector prior to shipment. Please use the following procedure, however, if pictures are not projected
properly. If signals are input that are substantially different from the frequency registered, pictures will not be properly displayed,
or a blue back (or no signal) screen will be displayed.
Selection Procedure
(selection is possible using Either the Remote Control or the Buttons on the Projector)
O
@
Press the MENU Button.
Use the ▲ and ▼ buttons to select the “SIGNAL MODE" Menu.
Then use the
4
and ► buttons to execute.
Use the A and ▼ buttons to select the “SIGNAL MODE" that
will yield the proper image,
Press the MENU Button twice to complete.
PICTURE
SIGNAL MODE
POSITION
SETTING
CLOCK
FEATURES
LANGUAGE
AUTO
640X400
640X480
640X480
800X600
800X600
800X600
IMAC 13"
[MAC 16"
PC9801 :
:70Hz
:60Hz
:75Hz
:56Hz
;60Hz
;75Hz
].67Hz
1:75Hz
56Hz
During the selection of the Signal Mode, in some cases it may be displaced outside the screen domain, and viewing would not
be possible. When confirming the present Signal Mode, or troubles are encountered during operations, you may either unplug
the RGB cable, or shut down the computer, and carry out the procedure from step
O
to return to the first display.
Table of Compatible PC Signals
Display Mode
Signal Data
Remarks
Pixels
Horizontal Scanning
_______ Froouoncv IkHzt________
Vertical Scanning
Frequency (Hz)
AUTO
Selection is made automatically from the following recorded modes.
640X400 :70Hz
640X400
31.5
70.1
640X480 :60Hz
640X480
31.5
59.9
640X480 ; 75Hz
640X480
37.5
75.0
800X600 :56Hz
800X600
35.2
56.3
Converted and
Displayed at 640X48C
800X600 :60Hz
800X600
37.9
60.3
800X600 :75Hz
800X600
46.9
75.0
[MAC 13"]; 67Hz
640X480
35.0
66.7
[MAC 16”]: 75Hz
832X624
49.7
74.6
Conveded and Displayed at
640
X
468
PC9801; 56Hz
640X400
24.8
56.4
• The pixel value for the Projector is 640X480 (meets requirements up through VGA). Signals of more than 640X480 (S-VGA),
(MAC 16) are converted to 640X480 and displayed, which causes some deterioration in picture quality.
25