Adjusting the vertical position (shift up or down), Adjustments for rgb input screen, Adjusting the screen position – Panasonic TC-LT1 Series User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjustments for RGB Input Screen
Adjusting the Screen Position
The position of the screen can be shifted left, right, up or down if the RGB input image projected on the screen is off centre,
even though the Projector and screen have been set up in the proper relative positions. (This is available only during RGB
input.)
Adjustment Procedure <Adjusting the Horizontal Position (Left and Right)>
o
Press the MENU Button.
Use the ▲ and ▼ buttons to select the “POSITION" menu.
Then use the
4
and ^ buttons to execute.
PICTURE
SIGNAL MODE
POSITION
SETTING
CLOCK
FEATURES
LANGUAGE
Use the ▲ and ▼ buttons to select H (Horizontal) - Pos.
{To adjust the vertical position, select V (Vertical) - Pos.)
While looking at the screen, use the
4
and ► buttons to
adjust the position.
• Press the "N"
button to
return to the
normalisation
setting.
Press the MENU Button twice to complete.
<Adjusting the Horizontal Position (Shift Left or Right)>
Press the ► button to shift the
image right.
Press the
4
button to shift
the image left.
<Adjusting the Vertical Position (Shift Up or Down)>
Press the ► button to lower the
image down.
Press the
4
button to shift
the image up.
• The V-Pos cannot be changed if the display mode for the Signal Mode is 640X400 : 70 Hz, 800X600 :56Hz, 800X600:60 Hz,
800X600 :75 Hz, or PC9801 :56 Hz.
26