Supplied cable unit, Multi cablo (veeb0133), Q24p round water-proof plug (male) – Panasonic AW-PH650 User Manual
Page 12: 0rj-45 modular plug, Videoout bncjack, Y out bnc jack, Prout bncjack, Pb out bncjack, G/l in bncjack, D-sub 15p connector (male)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Parts and theirfunctions
■Supplied cable unit
<Multi cablo (VEEB0133)
o
O
o
o
©
©
©
Q24P round water-proof plug (male)
Connect this to the multi connector [MULTI] on the main
unit.
0RJ-45 modular plug
Connect this to pan/tilt head controller.
It can be extended up to 1000 m.
To extend the connection, use a relay adapter purchased
on the market and use a 10BASE-T straight cable (UTP
category 5) for the extension.
©VIDEOOUT BNCjack
This is the output connector for the camera's video
signals.
Use a BNC coaxial cable for the connecting cable.
©Y OUT BNC jack
This is the output connector for the camera's video
signals.
Use a BNC coaxial cable for the connecting cable.
©PrOUT BNCjack
This is the output connector for the camera's video
signals.
Use a BNC coaxial cable for the connecting cable.
©Pb OUT BNCjack
This is the output connector for the camera's video
signals.
Use a BNC coaxial cable for the connecting cable.
©G/L IN BNCjack
This is the gen-lock signal input jack.
Use a BNC coaxial cable for the connecting cable.
©D-SUB 15P connector (male)
Connect the controller used for the multi purpose camera
to this connector. When connecting it directly, remove the
stud prior to use.
o
o
Pin No.
Signal name
1
—
9
—
2
—
10
—
3
—
11
—
4
—
12
GND
5
—
13
TXD (O
6
—
14
RXD (H)
7
TXD (H)
15
RXD (O
8
—
11 (E)