Installation – Panasonic AW-PH650 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Installation

<When the AW-E350 or AW-E650 camera is used>

® Use the 2 screws © supplied with the camera to attach

the mounting adapter O (supplied with the camera) to
the top panel of the camera.

@ Attach the positioning screw O (supplied) to the camera

mounting spacer 0.

@ Use the 2 screws © (supplied) to attach the camera

mounting spacer 0 to the mounting adapter O (supplied

with camera) on the top panel of the camera.

@ Attach the camera mount © to the camera mounting

spacer 0 using the 2 screws ©, flat washers © and
spring washers © (supplied).

(Make sure that the two sides of the camera mount are

higher than the central area that is attached.)

® Attach the lens to the camera.

Remove the lens hood and zoom lever.

<When the AW-E750 or AW-E860 camera is used>

® Attach the positioning screw O (supplied) to the camera

mounting spacer ©.

@ Use the 2 screws © (supplied) to attach the camera

mounting spacer © to the fan mounting seat O on the

top panel of the camera.

@ Attach the camera mount 0 to the camera mounting

spacer © using the 2 screws ©, flat washers © and
spring washers © (supplied).

(Make sure that the two sides of the camera mount are

higher than the central area that is attached.)

@ Attach the lens to the camera.

Remove the lens hood and zoom lever.

The camera mount in the opposite direction from when the AW-E655 is used as the camera.

To ensure that none of the screws are loose, use a tool to tighten them up securely.

17(E)

Advertising
This manual is related to the following products: