Preliminary steps, If you suspect something wrong, Troubleshooting tips – Panasonic CQ-C8300U User Manual

Page 52: Common, Troubleshooting

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Troubleshooting

Preliminary Steps

Check and take steps as described in the tables below.

If You Suspect Something Wrong

Immediately switch the power off.
Disconnect the power connector and check that there is
neither smoke nor heat from the unit before asking for
repairs. Never try to repair the unit by yourself because it
is dangerous to do so.

Caution;

• Do not use the unit if it malfunctions or if

there is something wrong.

• Do not use the unit in abnormal condition,

for example, without sound, or with smoke

or foul smell, which can cause ignition or
electric shock. Immediately stop using it and
call the store where you purchased it.

Troubleshooting Tips

□ Common

c

Problem

D

The Power tails

unintentionally.

Sound is not

generated.

No power to the unit.

The demonstration
screen displayed and
no operable.

Some operations are

not executable.

[ Possible cause

Possible solution ]

The power cord (battery, ACC and

ground) is connected in the wrong
way.

Check the wiring.

Fuse blow out.

Eliminate the cause of fuse blow out

and replace the fuse with new one.

Consult your dealer.

f

The safety device works.

Call the store where you purchased

the unit, or your nearest Panasonic

Servicenter.

MUTE is set to ON.

Set MUTE to OFF.

The wiring of the speaker lines
are not correct, or a break or poor
contact arises.

Check the wiring in accordance with

the wiring diagram.

c

You cannot operate the unit while
the demonstration screen appears.

Press [DISP] (display) to end the

demonstration screen.

If the demonstration screen

appears frequently, there is a

possibility that poor contact or

wrong wiring arises between the

battery lead of the unit and the

battery cable of the car.

(The battery lead should be always

powered.)

V

Check the battery wiring in accordance

with the wiring diagram.

Some operations are not executable
in particular modes such as menu

mode.

Read the operating instructions

carefully and cancel the mode. In

case the unit is still out of order,

consult the dealer.

---------------------

^

______________

/

52

CQ-C840Q/8300/8200/8100U

Advertising
This manual is related to the following products: