Instaliation procedures, A) using the rear support strap, B) using the rubber cushion (option) – Panasonic CQ-C8300U User Manual
Page 64: Installation guide, Continued) instaliation procedures
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation Guide
(continued)
Instaliation Procedures
First complete the electrical connections, and then
check them for correctness (page 66).
Remove the
mounting collar©
and the trim plate©
from the main unit
temporarily, which
are already mounted
at shipment.
©Power
connector
Mounting
springs
Mounting holes
©Mounting bolt
Engage the mounting
springs (ii;) in the
mounting holes of the
mounting collar©
firmly.
@—Mounting
hole
Mounting springs
(a) Using the rear support strap
@
Fire wall of car
©Tapping screw
3
т т ф
©Hex. nut
©Rear support strap
©Mounting bolt
©Mounting collar
The included mounting collar © is designed
specifically for this unit. Do not use it to attach
any other model.
Insert mounting coilar © into the
dashboard, and bend the mounting tabs out
with a screwdriver.
The tabs to be bent vary depending on
the car. To securely install the unit, fully
bend a number of the tabs so that there is
no rattling.
Example:
Secure the rear of the unit.
After fixing mounting bolt ©and power
connector ©, fix the rear of the unit to the
car body by either method
(a)
or
(b)
shown
below.
Insert trim plate ©.
After installation,
reconnect the
negative 0 battery
terminal.
(b) Using the rubber cushion (option)
Rear support bracket
Rubber cushion (option) (provided on the car)
©Mounting bolt
©Mounting collar
64
XQ-C8400/S30d/8200/8l
OttO t