Anti-theft system, Remove the removable face plate, Install removable face plate – Panasonic CQ-C8300U User Manual

Page 59: Security indicator, Panei removal alarm

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Anti-Theft System

This unit is equipped with a removable face plate. Removing this face plate makes the unit totally inoperable.

Caution:

• This face plate is not waterproof. Do not expose

it to water or excessive moisture.

• Do not remove the face plate while driving your

car.

• Do not place the face plate on the dashboard

or nearby areas where the temperature rises to
high level.

• Do not touch the contacts on the face plate or

on the main unit, since this may result In poor
electrical contacts.

• If dirt or other foreign substances get on the

contacts, wipe them off with a clean and dry
cloth.

• To avoid damaging the face plate, do not push it

down or place objects on it while it is open.

• The front panel will automatically close about

5 seconds after (release) is pressed while

the front panel is tilted or open, so take care to

ensure that your fingers will not be pinched by

the closing panel.

Remove the Removable Face Plate

^Switch off the power of the unit

(page 22).

©Press [(^ (release) to remove the removable

face plate.

(The face plate disengages with a click when it is
removed.)

(Release)

Note:

• Be absolutely sure to turn off the main unit’s

power before removing the removable face plate.

• Do not install or remove the removable face plate

while it is moving.

©Gently press the bottom of the case and open the

cover. Race the face plate into the case and take
it with you when you leave the car.

Install Removable Face Plate

©Slide the left side of the removable face plate in

place.

©Press the right end of removable face plate until

“click” is heard.

Contact

Security Indicator

The security indicator blinks when the face plate is

removed from the unit.

This function is activated when the security function

is on (page 48).

Panei Removal Alarm

This alarm sounds to warn you not to forget to

remove the panel before leaving your car.

This function is activated when the security function

is on (page 48).

CQ-C8400/8300/8200/8100U

59

Advertising
This manual is related to the following products: