Panasonic SC-CH84M - Manual (Page 26)

for playback only
WèMteniént
-V.BASS
a
Selecting sound quality and field
Base your selection on the type of music and how you want to listen
to it.
£0 SPACE Press EQ SPACE to select the
desired mode.
Each time the button is pressed, the indi­
cation will change as follows.
DISCO^LIVE^HALL^HEAVY
T I
FLAT-^SOFT<-CLEAR^---- !
LIVE:
HALL:
DISCO: Use to reproduce a long reverberating sound like that
heard in discotheques.
Use primariiy for vocai pieces to add gloss to the vocais.
Use to impart a deep bass and spread which wili make you
feei as if you were in a large concert hall.
HEAVY: Use to add “punch” to rock and other music.
CLEAR: Use to clarify the treble range of jazz, etc,
SOFT:
Use to listen to background music, etc.
To cancel the mode:
Press EQ SPACE to seiect “FLAT'.
Adding bass
Press -V. BASS/-DEMO.
•fH-i
i,*
«
m T R P E . ^
P L fì y y C-
Press the button again to cancel.
“V. BASS" goes out.
26
Easy play
When you load a CD or cassette in advance, you can start play
directly from standby by pressing the appropriate selector button.
Listening to tapes
Press TAPE DECK 1/2.
• If both decks are loaded with tapes,
playback starts from deck 2.
•The reverse mode stores the previously
selected mode in memory.
Listening to compact discs
DECK1/2
%
%
Press CD.
• Play will begin from the disc that you
last heard.
•When the tracks has been pro­
grammed, the play will start in the pro­
grammed sequence.
Listening to radio broadcasts
%
Press TUNER BAND.
You can receive the station last tuned in.
Listening to external units
AUX
Press AUX.
The stereo will turn on and the unit con­
nected to the “AUX” terminals will be se­
lected as the input source.
Demo function
This stereo comes with a “demo” function. The default setting is for
the demo function to be ON.
Switching the demo function on or off:
Press and hold -V.BASS/-DEMO for about 2 seconds or more.
When the demo function Is set to on:
•When the power Is ON:
When the input source is set to “CD" or ‘TAPE”, the demo function
will run automatically after about 2 minutes or more pass in the stop
mode.
You can turn the demo function OFF any time by pressing ► or ■.
•When the system is In the power standby mode:
When you do not set the time, the demo function runs automati­
cally.