Panasonic SC-CH84M - Manual (Page 30)

Recording from compact discs
Normal recording
REC
START/STOP
1
2
DECK 2
Press A OPEN on deck 2, and
then insert the tape.
Close the holder.
DOLBY NR
When making a Doiby NR re­
cording, press DOLBY NR so
that the Doiby NR indicator
lights.
S? U S , ^
7 R P E " _
- • T b «
REV MODE
Press REV MODE to select the
reverse mode.
7 ~ O n e side will record, and then the
tape will stop automatically at the
tape end.
Both sides will record {forward
side->reverse side), and then the
tape will stop automatically at the
tape end.
cZ-y- Same as above. {When you press
REC START/STOP. will be
automatically switched over to
OECKia
%
Press TAPE DECK 1/2 to select
“DECK 2".
Press < o r > , immediately fol­
lowed by ■.
\ This selects which direction the tape runs
in.
Sr 0 aK3
7 H P E
- we«
► : Recording from side A
<:
Recording onto side B
6
7
8
I
Press CD.
T!)
QROUP^NAME
Press DISC SKIP/GROUP
NAME to select the disc you
want to record.
STARWOP
Press REC START/STOP to
start recording.
To stop recording
To stop recording after a 4 second silent interval
Press■■
To stop recording without a silent interval
Press REC START/STOP.
The CD will stop automatically too.
To record programmed tracks
© Perform steps 1-6, and then press PROGRAM on the remote
control.
© Press DISC on the remote control.
@ Select the disc from the remote control with the numeric buttons,
® Select the track number from the remote control with the numeric
buttons.
d) Repeat steps until programming all tracks (max. 24 tracks).
© Press REC START/STOP to start recording.
30