Panasonic SC-CH84M - Manual (Page 27)

[DECK 2 only I
To mute the volume
by remote control only
This feature is convenient when you have a telephone call, etc.
MUDNG Press MUTING.
a t a p e " ” .
IN U T I N Gc
Press the button again to cancel.
“MUTING” goes out.
Muting can also be canceled by lowering
the volume all the way (— dB).
When the system is turned off, the muting
operation will be automatically canceled.
Type of tape which can be recorded
correctly
The unit automatically identifies the type of tape.
Normal position/TYPE I 0
High position/TYPE II O
Metal position/TYPE IV X
Recording may not turn out as you want it to when using metal tapes.
How to advance the leader tape
Wind the leader tape forward so that recording can start as soon as
you press the button. But, this is not necessary if edit-recording from
CDs.
The leader tape is the first few revolutions that you cannot record on.
Magnetic section
(on which sound can be recorded)
Leader tape
(on which sound cannot be recorded)
Concerning the volume level while
recording
The deck automatically sets the recording level. If you change the
volume level while recording, it does not affect the recording volume
level.
Concerning the sound quality and field
while recording
While recording, none of the changes you make to sound quality or
field will affect recording.
While recording, "FLAT’ is temporarily selected no matter what
sound quality and field settings you selected. When finished record­
ing, the stereo will revert back to your settings.
BJBIBI
• You cannot open the deck while recording with it.
•You cannot fast-forward or rewind one deck while recording with
the other.
To erase a recorded sound
1. Press TAPE DECK 1/2.
2. insert the recorded tape into deck 2,
3. Press DOLBY NR so that the Dolby NR indicator goes off.
4. Press REV MODE to select reverse mode.
5. Press REC START/STOP.
Your attention is drawn to the fact that recording pre-recorded
tapes or discs or other published or broadcast material may
infringe copyright laws.
27