Mams, For united kingdom) – Panasonic SC-CH84M User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

mams

(For United Kingdom)

C‘EB” area code model only)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5-ampere fuse Is fitted in this plug.
Should the fuse need to be replaced please ensure that
the replacement fuse has a rating of 5-ampere and that

it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark

<$>

or the BSI mark ^ on the

body of the fuse.

If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced,
if you lose the fuse cover the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from your
local dealer.

CAUTION!

IF

THE

FITTED

MOULDED

PLUG

IS

UNSUITABLE FOR THE SOCKET OUTLET IN
YOUR HOME THEN THE FUSE SHOULD BE

REMOVED AND THE PLUG CUT OFF AND
DISPOSED OF SAFELY.

THERE IS A DANGER OF SEVERE ELECTRI­
CAL SHOCK IF THE CUT OFF PLUG IS IN­
SERTED INTO ANY 13-AMPERE SOCKET.

If a new plug is to be fitted please observe the wiring
code as shown below.
If in any doubt please consult a qualified electrician.

IMPORTANT

The wires in this mains lead are coloured in accordance
with the following code:

Blue:

Neutral

Brown: Live

As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured mark­

ings identifying the terminals in your plug, proceed as

follows:
The wire which is coloured BLUE must be connected to
the terminal in the plug which is marked with the letter

N or coloured BLACK.

The wire which is coloured BROWN must be con­
nected to the terminal in the plug which is marked with
the letter L or coloured RED.

Under no circumstances should either of these wires be
connected to the earth terminal of the three pin plug,
marked with the letter E or the Earth Symbol

Before use

Remove the connector cover as follows.

How to replace the fuse

1. Remove the fuse cover with a screwdriver.

2. Replace the fuse and attach the fuse cover.

Advertising