Yamaha SPX90 II - Manual (Page 5)

REAR PANEL
Remote Control Connector
Permits remote access to SPX90II effect programs.
The optional remote control unit, model RC7,
permits direct access to programs 1 through 7 and
31 through 37, while all other preset programs may
be accessed sequentially.
This LED lights whenever
a remote control key is
pressed.
It is possible to call user
programs when this LED
is lighted.
- 34 - - 35 -
KEY ON
^ USER
YAMAHA
-Preset keys.
When this key is
pressed, the USER LED
will light and it becomes
possible to select user
programs 31 through 37.
U.S & Canadaian models
o
MIDI THRU Connector
Re-transmits MIDI data received at the MIDI IN
connector to subsequent MIDI instruments.
0 MIDI IN Connector
Permits SPX90II effect programs to be automat­
ically selected via a MIDI signal. This connector
must be connected to the MIDI OUT connector
of the transmitting MIDI instrument via a standard
MIDI cable.
O Output Level Selector (-20 dB, -i-4 dB)
Facilitates SPX90II source/line level (sensitivity)
matching.
0
Output Jacks (L and R)
These are standard mono 1/4" phone jacks which
deliver the direct and effect signal to subsequent
mixing or amplification equipment. Since the
SPX90II offers stereo output, we recommend that
the output signal be fed in stereo to a stereo sound
system in order to take full advantage of the superb
stereo effects provided; Output impedance is 600
ohms.
USER LED OFF
— Preset programs —
USER LED ON
— User programs —
1. REV 1 HALL 31. User program
2. REV 2 ROOM 32. User program
3. REV 2 VOCAL 33. User program
4. REV 4 PLATE 34. User program
5. EARLY REFLECTION 1 35. User program
6. EARLY REFLECTION 2 36. User program
7. DELAY L, R
1
37. User program
i
30. PARAMETRIC EQ
(Programs 8 through 30
selected sequentially by
pressing OTHERS/ -37-
key)
0
Input Level Selector (-20 dB, h -4 dB)
Permits SPX90II source/line level (sensitivity)
matching.
O Input jack
This standard unbalanced mono 1 /4" phone jack
accepts the input signal to the SPX90II. Input
impedance is 10 k-ohms.