Four important points, Ppint:^/, point 2, Always watch your battery level – Panasonic CF-25 User Manual

Page 12: Conserving power, Things to remember, Adjust the brightness (dark) with, Computing oh tho road

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Computing Oh tho Road

4 '

\

■ V-

One of the mam teatures of notebook-type computers is that you have the power of computing

away troni your home or office In the following, information is provided on how to maximize
use of the battery pack which is necessary for such computing

# Four Important Points

PPINT:^/,

POINT

2

.

Be sure to charge your battery before and after use

POINT a

point

-4.

To get the maximum use of your battery, set the power

management mode

Check to see that you have your AC adapter with you before
leaving your home or office
Purchasing an extra battery (CF-VZS251) or the optional battery charger
(CF-VCB251A) Ks highly recommended

Always watch your battery level'

Conserving Power

Things to Remember

# Leave your computer off when it is not in use (opage io)

Adjust the brightness (dark) with

(cépage 42)

Before stepping away from your computer, press Q + @ to

put your computer in the standby mode
The standby mode helps you conserve power by cutting off power to LCD etc To
resume, you may press any key

tn the power management mode, the setting of [Advanced] is
recommended (opage 13)

With the Setup Utility, you can set the [Advanced] mode This mode allows you to
maximize power save regardless of whether you are using only the battery pack or the
AC adapter

Setting the hibernation timeout (o-page 13)

The hibernation function (G’page

1 1

) allows you to save power by automatically cutting

off power when the computer is idle or there i'' no access to individual devices for 4 or 16

minutes If [Advanced] or [Standard (Battcry/AC adapter)) is selected for [Power

Saving] the hibernation timeout function will go into effect for both the battery pack
and the AC adapter If, however [Standard (Battery)] is selected for [Power Saving! it
will go into effect only dunng operation by the battery The standby timeout function is
automatically set when [Advanced] or [Standard] is set Note that the standby timeout
precedes the hibernation timeout

It should be noted that for some applications the hibernation timeout will not work
pi Opel ly

A

note

>

If you plan to use only the battery pack oi set the power management, it is necessary to

check [Allow Windows to manage power use on this computer] in [Start] - fSel-
tingsj - [CoiUiol Panel] - ¡Power] If no check is added the hibernation timeout will

not occur

12

Advertising