Panasonic CF-25 - Manual (Page 6)

It’s now time to get started. Please read the steps below to help you learn what parts are in-
eluded, and to gain an understanding of some basie computer-related operations.
1
Confirm the inclusion of all parts
Make sure the parts shown in the figure have been supplied. If any of them is missing
or is not working properly, please consult your nearest Panasonic dealer.
>; Please prepare nine*2HD'lbrniatted floppy disks to;create baelcup disks of the
!, .Panasonic utilities. (These back up. disks are to'be used when reinstallatiomof the,!
( ‘Panasonic utilities becomes necessary., V 'p ‘ V : - - ^ .! i' .t .r' • '
2 Insert the battery pack{cépage 16)
Connect your computer to a power outlet
Be sure thè;ÀC adapter is connected until completing Step 6 on page 7.
Handling the.AC adapter v ' ■ .
• Do not twist or pull the AC power cord forcefully. Doing .so may damage the
connections:. . ' . ■
• Use only the specified AC adapter (factory control number: CF-AA 1526) with
your^computef. Using an AC adapter other than the one supplied might damage
. . iheibattery and/or the computer. * -.J‘‘
0 When the DC plug is not connected to the computer, disconnect the AC cord
from your AC waif outlet as well.
• Problems such as sudden voltage drops/surges may aiise during periods of thun­
der and lightning. Since this could adversely affect your computer, an
uninterruptible power source (UPS) is highly recommended.