Starting up, Battery indicator, Character input – Panasonic CF-25 User Manual

Page 30: Dealing with problems

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Dealing with Problems

When a problem occurs please refer to this page If you think it has to do with the softwaie application you are using please
read the related manual 11 for some reason you still cannot figure out the problem, please consult your nearest Panasonic dealer

• Starting Up

The power indicator or bat­

tery indicator IS not Ht,

t

• Check the cable connection (or the AC adapter ^
• Check to see if a iully charged battery is pioperly installed page 14
• Pressing the reset button will solve the problem

(y

page 42

g IS displayed

^

Please input your password 11 you have lorgotten it consult your nearest Panasonic dealer

IS not displayed

(Ooce this icon is executed.' it ssitl

nut

be

displased later) ^ ^

If

before

you

double-click

it

disappears,

select

[StartJ-[Run|,

input

[c \util\avapp\psetup bat] and press

\

ok

, |

1 "is not displayed

CF:i

0

url '' '( i "

Select |Siartl-[Run], input fc \utii\avapp\manualVseticon bat) and press | or , ]

[POST Start Up Errorts)] is

displayed

. ' -

y

page 29

The

pre-memory

count,

AVindows startup, or an op­

eration is extremely slow

Run [Load Default Settings iPnP)] in the Setup Utility This will restore the Setup Utility’s

settings to their default values (except the passw<ird settings) Then, the Setup Utility must he
nan once again for you to input the appropriate operating environment settings (The processing

speed depends on the application software used so this operation may not cause the processing
spieed to increase )

The date and time are

'

incorrect

; I

• You can set the date and time through [Date/Time] in [Start] - [Settings] - [Control Panel]

Another way is with the DATE and TIME commands in MS-DOS

• If you continue to experience problems the internal battery maintaining the clock may

need to be replaced Please consult your nearest Panasonic dealer

Battery Indicator

The red battery indicator "

-lights.

^ Repeated beeps sound while

the computer is in use.

The battery level is low Connect the AC adapter or replace the battei y pack with a fully
charged one If you have neither the adapter nor an extra battery save your data and power

off your computer

The red battery indicator

lights, a beep sounds

The battery temperature has iiscn due to electrical discharge caused by a large load Connect
the AC adapter set the power-saving function and turn down the brightness ot the display to
reduce the load on the battery

The red indicator blinks

• The battery pack or recharging tunction may be detective Quickly remove the battery

pack and disconnect the AC adapter then connect them again

• If the problem persists consult your nearest Panasonic dealer

The red indicator lights

(or

.1

99%

readin}’ is dtspla><;tii

for

an extended period of time

When the battery pack is fully charged turn on your computer unplug the AC adapter then
completely discharge the battery

Alter the AC adapter is con­

nected, the orange indicator

blinks five times

Unable to charge because ol an improper temperature range

q

= page 15

Character Input

Unable to input anything
hut numerals

If NumLk and Key Pad are on the Numeric Key Pad is ON To swiicli it OFF

press (g| + (

1

^^

Only capital letters are
being input

11 CapsLock IS on the Caps Lock is ON To switch it OFF press [(

wl

H]

How to input European

characters (11, a, g) or

symbols IS unclear

Select |Statt] - (Run) input |c \windows\charmap e\e] and press | oi | The Character

Map will he displayed Point to the desired tout name and select it

30

Advertising