Panasonic CF-25 - Manual (Page 40)

Setup Utility
Running the Setup Utility
To run the Setup Utility, you
need to restart your computer
Upoirseeing --- ------------------------
this message Press FI for Setup
press
fFrn
NOTE>
• The Setup Utility will not be run if [ j is not pressed soon after the computer restarts
In this case you need to restart your computer again
It IS displayed enter your password
It both the [User Password] and [Supervisor Password] have been set alter entering the
User Passwoid [Supervisor Setup] and [Load Default Setting ] will not be displayed
on the main screen
To display the [Supervisor Setup)
y Use ¡Q + Power Switeh to turn your computer ofl
2 Restart the computer and press [ ^~] when [Press FI lor Setup] is displayed
$ When IS displayed enter the Supervisor Password
For more details on-line help is available press [~^' ]
<Main Scrcen>
Piogram Completion
• Hibernation settings (Q’P'ige 11)
• Power M inageineni settings (f^spage 1
• Secuniv Settings ( Q’page 17)
• I laidware Expansion Settings (¡^page 22)
Atiei you have Lumpleted all settings you may
exit the Setup Utility program
Setup Utility
•System Setup,-------
•Power Management
•Supervisor Setup -
Save Settings.
Restore Settings
Load Delault Settings (PnP)-
Load Default Settings (Non PnP).
i-(-Exit Setup . .
Return to the state existing at the time ot Setup Utility
startup or to the settings saved with {Save Settings]
— Set delault settings
• (PnP) denotes tor Windows 95
• (Non-PnP) denotes tor other than Windows 95
• When the Supers isoi Password has been set input of
the password is neccssaiy
Key Operations
S
Esc
!o display the correspond­
ing help” flic
To make a selection
To display previous screen
( To exit the program at the
main screen)
To move among the items
To move among the values ot
each Item
To letuni to the setting helore a
change
lb set the default values
Closing the Proigram
Exit Setup
Settings were changed
Do you want to save them'?
Yes, save and exit the Setup Utility
No exit the Setup Utility without saving
No, return to the Setup Utility
X note >
If the Usci P<isswoid has been set the password
must be entered beloie Windows can start
(I liL dopljj 111 IV be ditterciil it im (.lungLV lo iht, '■ eUing'> are niavie )
40