Panasonic SC-CH950 - Manual (Page 20)

Front Panel Controls and Functions
(continued)
Cassette deck section
0 Deck 1 fast-forward/rewind/tape program sen­
sor (TPS) buttons
[◄◄ (TPS) ►►]
Press to advance or rewind the tape, or to quickly search for
the beginning of a program while the tape is being played.
@) Dolby noise reduction button
(DOLBY NR)
Press to reduce hissing noise on the tape. This system has
both the Dolby B-type and Dolby C-type noise reduction.
@ Reverse mode select button and indicators
(REVERSE MODE)
Press to select the reverse mode (for playback and recording).
Deck 1 counter reset button
(COUNTER RESET 1)
Press to reset the tape counter indicator to “0000”.
@ Deck 2 counter reset button
(COUNTER RESET 2)
@ One-touch tape edit buttons (NOR, HIGH)
Press to start the tape-to-tape recording. (See page 45.)
0 Deck 2 fast-forward/rewind/tape program sen­
sor (TPS) buttons [◄◄ (TPS) ►►]
(^ CCRT (computer control record tuning) but­
ton (CCRT)
Press to adjust the recording level, equalizer and bias before
recording. (See pages 42-43.)
0 Record pause button (EigaMihtj )
Press to put deck 2 into the record standby mode.
0 Deck 1 reverse-side playback button (<)
Press to start the playback in the reverse direction.
0 Deck 1 forward-side playback button (>)
Press to start the playback in the forward direction.
Deck 1 stop/cassette holder open button
(■/A)
Press to stop the tape or open the cassette holder.
Deck 2 stop/cassette holder open button
(■/A)
0
Deck 2 reverse-side playback button (<I)
Press to start the playback or recording in the forward di­
rection.
0 Deck 2 forward-side playback button (>)
Press to start the playback or recording in the reverse di­
rection.