To play back prerecorded cassettes, Listening to tapes – Panasonic SC-CH950 User Manual

Page 37

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Listening to Tapes

To play back prerecorded cassettes

You can use either deck 1 or deck 2 for tape playback by following
the same steps. (This page shows an example using deck 1.)

... I(

1-

2— **

mol .

Jon-I

o««« «

Jd%

o O O V

g=C

4 1 3 2

nodbsa

63S 6

cbcbcbdKij

o*o5a<3

opcBa

cfTacjaB

H

c

SS

dcd

B)

QGGOb

a

(Step 4 also available from the remote control)

1

Press the deck 1 stop/cassette holder open

button, and then insert the cassette you wish

to play.

Insert the cassette with the exposed tape facing down.

The cassette holder will automatically close.
You can use normal, chrome and metal tapes for playback.

This deck automatically identifies the kind of tape loaded, and
sets the equalization accordingly.

(Auto tape selector function)

2

Press REVERSE MODE.

Each time you press, one of the reverse modes' indicator will
light to show which mode you select.

T~* : The player plays one side only, and then the tape

automatically stops.

The player plays both sides 8 times, and then the
tape automatically stops.

When you load a cassette Into only one of the two

decks:

The player playaboth sides of the tape, then automat­

ically stops.
When you load cassettes into both decks:
The player plays both sides (forward and reverse) of

the tape in deck 1, and then both sides of the tape in

deck 2. (Sequential tape play—see page 39.)

GO

Press DOLBY NR if the cassette you want to
play was recorded with Dolby noise reduction

B or C mode.
Each time you press, the Dolby noise reduction indicators (B

or C) will light.

If the tape was not recorded in a DOLBY NR mode, press
DOLBY NR to go off the Dolby noise reduction indicator (B or

C).

Press one of the playback buttons to start
playback.

>: The forward side (front side) will play.

<: The reverse side will play.

The display indicates which tape is playing.

To operate with the remote control when you load cassettes in

both decks, press DECK 1/2 to select the deck you want to
use.
Deck 1 or Deck 2 remote indicator ((SQ) will illuminate to
show which deck you can operate.

37

Advertising
This manual is related to the following products: