Connections (continued), Audio connections, Unit amplifier speaker – Panasonic OMNIVISION PV-DM2791 User Manual
Page 12: Ready checklist, For your reference, Unit
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections (continued)
Audio connections
■ Unit Amplifier Speaker
Do the “Speaker ON/OFF system” steps on
page 47, and select "OFF.”
Unit
Ready Checklist
O Turn down the volume, then turn this unit, as well as
other equipment to be connected, off before
proceeding with connection.
□ Do not block ventilation holes of any of the
equipment and arrange them so that air can
circulate freely.
□ Read through the instructions before connecting
other equipment.
Manufactured under license from Dolby
Laboratories. “Dolby”, and the double-D
symbol are trademarks of Dolby Laboratories.
Confidential Unpublished Works.© 1992-1997
Dolby Laboratories, Inc. All rights reserved.
For your reference:
• Dolby Digital is a digital sound compression technique
developed by the Dolby Laboratories Licensing
Corporation. Supporting 5.1-channel surround sound,
as well as stereo (2-channei) sound, this technique
enables a large quantity of sound data to be efficiently
recorded on a disc.
• Linear PCM is a signal recording format used in CDs.
While CDs are recorded in 44,1 kHz/16 bit, DVDs are
recorded in 48 kHz/16 bit up to 96 kHz/24 bit.
• If you have a Dolby Pro Logic Surround decoder, you
will obtain the full benefit of Pro Logic from the same
DVD movies that provide full 5.1 channel Dolby Digital
soundtracks, as well as from titles with the Dolby
Surround mark. For information on Panasonic or
Technics Dolby Pro Logic Surround Sound Decoders
please contact your local dealer.
12
For assistance, please call ; 1-800-211-PANA(7262) or send e-mail to : [email protected]