Panasonic OMNIVISION PV-DM2791 - Manual (Page 64)

Warning and Instruction Displays
These displays will alert you of a missed operation or provide further instructions.
OSD Caution Page
NO CH FOUND PLEASE CHECK
ANTENNA CABLE CONNECTION THEN
PRESS CH UP KEY AGAIN • If no active channels are found for
CHANNEL MEMORY...
11
PLEASE SET CLOCK BEFORE
PROGRAMMING
• If you attempt to set or review a Timer
Recording or set the On-Timer and the
Clock is not set...
16,17
CHECK CASSETTE RECORD TAB
• If you press REC, and a cassette is inserted
with no record tab...
4,18
TO CANCEL TIMER REC HOLD DOWN
STOP KEY FOR APPROX 3 SEC
• If you press STOP during a Timer
Recording...
31
NO CASSETTE
PLEASE INSERT A CASSETTE
• If you press PLAY, FF, REW, or REC
without a cassette inserted...
18
PLEASE PREPARE FOR TIMER REC
• If the unit is not in Stop mode or a cassette
with record tab is not inserted two minutes
before a Timer Recording is about to
begin... 30,31
VIDEO HEADS MAY NEED CLEANING
PLEASE INSERT HEAD CLEANING
CASSETTE OR REFER TO MANUAL
END: PLAY • If head cleaning becomes necessary while
playing back a tape...
6
VCR LOCK ACTIVATED
• If you press a function button other than
STOP/EJECT or POWER while the unit is in
VCR Lock mode...
41
PLEASE CHECK THE DISC, AND FOR
STAINS OR SCRATCHES ON DISC
• If you press PLAY, or the unit reads data
from a stained or scratched disc in DVD
mode. Also, if the type of disc is other than
DVD, Video CD or CD... 7
IT IS PROHIBITED TO COPY DVD/
VIDEO CD/CD TO VHS
• If you press REC in DVD mode...
18,19
64
For assistance, please call: 1-800-211*PANA(7262) or send e-mail to : [email protected]