Panasonic OMNIVISION PV-DM2791 - Manual (Page 30)

Timer Recording
You can set up to 8 programs to be recorded while
you are away.
1
Press PROG* to display SET
PROGRAM screen.
SET PROGRAM
ON TIMER
SLEEP TIKCR-.t»
SQ£CT:A »
SET iSET
END :PflOG
1) Press
AT
to select
TIMER PROGRAMMING.
2) Press SET to
display screen.
• If a program is already in
memory, press AT, and
SET to select an unused
program number.
START STOP CH
wfv
CATEGORY; N/A
SELECT
SET
END A ▼
SET
PROG
Press
AT
to select
and SET or ◄ ► to set
the recording DATE.
• 1-31 = One time
• DAILY = MON-FRI
• WEEKLY SUN-SAT
= Same time once a week
■31— 1—2
DAILY
Example „ „
—^ ^8—9
Today’s-------- 7 SELECTA/V selection Order
Date
I
WEEKLY weekly __ WEEKLY
(SAT) (MON) (SUN)
Repeat step 3 to set:
• start time, stop time
• Channel (or LINE for outside source)
• Category [N/A (not applicable), SPORTS, MOVIE,
COMEDY, MUSIC, DRAMA]
• Speed (SP, LP, SLP)
[^r Ready Checklist
□ All connections are made.
□ Your unit is plugged in.
□ The clock is set to correct time.
□ The tape is long enough.
□ The record tab is in place.
P DT START STOP CH SPD
3 ---------
4
---
CANCEL :ADOiDLT
SELECT 1-0:A ¥
ENTER ;SET
END iPROQ
Press PROG to end
the program.
To Enter More
Programs,
press
AT
to select
and SET to set a blank
program number, and
then repeat step 3.
Press PROG twice to exit this mode.
• If you’re using a cable box, make sure that it
is tuned to the desired channel and the power
is left on for timer recording.
• PROG TIMER Indicator lights up on the unit.
30
For assistance, please call: 1-800-211-PANA(7262) or send e-mail to : [email protected]